Industrial operations under audit

Sustaira Advisory · Practice Areas

21 compliance programmes, one operator.

Statutory audits that answer to an inspector, disclosure work that answers to an assurance provider, and training that answers to an evacuation drill. Every programme below is delivered by our own engineers and auditors.

Catalogue at a glance

21
Programmes
5
Statutory audits
5
ESG advisory
11
Training tracks

Statutory Audit

Statutory third-party audits and risk studies that hold up to a factory inspectorate.

5 programmes

Comprehensive Fire & Life Safety Audit

Thorough statutory audit of active & passive fire protection, hydrants, detection systems, means of escape, and emergency response.

Fire & Life Safety/NBC 2016 Part 4, NFPA Standards & State Fire Acts

  • Adequacy and healthiness of Fire Detection & Alarm Systems (smoke/heat sensors, MCP, control panel)
  • Inspection of Fire Hydrant systems, wet risers, jockey & main fire pumps, and pressure testing
  • Automatic Sprinkler System coverage density, piping integrity, and flow alarm checks
  • +3 more
View programme

Electrical Safety Audit & FLIR Infrared Thermography

Zero electrical fire risk and arc flash prevention via electrical load balancing, FLIR thermal imaging, and earth pit impedance testing.

Electrical Safety/Central Electricity Authority (CEA) Regulations 2010 & IEEE Standards

  • Quantitative Infrared Thermography of Transformers, HT/LT Panels, Busducts, and Capacitor Banks (FLIR)
  • Measurement of Earth Pit Resistance across all dedicated electrical and lightning protection pits
  • Evaluation of Earthing Continuity and neutral-to-earth voltage checks
  • +3 more
View programme

Statutory Safety Audit under IS 14489:2018 & Factories Act

Mandatory third-party safety management system audit for industrial manufacturing plants, chemical sites, and engineering works.

Safety Management Systems/IS 14489:2018 & State Factories Rules (Section 41-A)

  • Review of Safety Policy, Safety Organization, and Safety Committee operation & minutes
  • Standard Operating Procedures (SOPs) and Permit-to-Work (PTW) system adherence (Hot work, Height, Confined)
  • Plant layout safety, machinery guarding compliance (Factories Act Section 21), and interlocking mechanisms
  • +3 more
View programme

HIRA & Process Hazard Analysis (HAZOP) Studies

Systematic examination of process lines, continuous reactors, and storage installations to uncover catastrophic risk nodes.

Advisory/IEC 61882 (HAZOP Application Guide) & ISO 45001 Clause 6

  • P&ID line-by-line HAZOP node definition using standard guidewords (More Flow, Less Temp, Reverse, etc.)
  • Quantification of cause, consequence, existing safeguards, and residual risk severity
  • Hazard Identification and Risk Assessment (HIRA) across baseline plant operations and routine/non-routine tasks
  • +2 more
View programme

Industrial Hygiene, IAQ & Environmental Exposure Audits

Workplace exposure monitoring for volatile organic compounds (VOCs), hazardous dust, noise contours, and ergonomic illumination.

Advisory/Factories Act Schedule 2, OSHA & CPCB Workplace Air Norms

  • Personal and area air sampling for airborne respirable particulate matter (PM2.5, PM10) and toxic vapors
  • Sound level mapping and 8-hour Time Weighted Average (TWA) noise dosimeter logging on high-noise shopfloors
  • Lux illumination level survey across precision assembly, control rooms, and warehouse aisles
  • +2 more
View programme

ESG Consulting

Disclosure, carbon and management-system work that survives assurance and board review.

5 programmes

SEBI BRSR & BRSR Core Assurance Readiness

Mandatory ESG disclosure advisory and value chain partner readiness across all 9 Principles of Business Responsibility.

Disclosure & Compliance/SEBI Circular / National Guidelines on Responsible Business Conduct (NGRBC)

  • Section A, B & C quantitative and qualitative parameter mapping across 9 NGRBC principles
  • BRSR Core specific KPIs: GHG emissions footprint, water footprint, circularity, gender diversity, and wage ratios
  • Value Chain (Supply Chain) ESG Due Diligence and Tier-1 supplier data collection framework
  • +2 more
View programme

GHG Protocol Scope 1, 2 & 3 Emissions & Decarbonization

Comprehensive baseline carbon accounting, science-based reduction targets, and net-zero roadmapping for Indian corporates.

Climate & Carbon/GHG Protocol Corporate Standard & ISO 14064-1/2

  • Scope 1: Direct emissions from stationary combustion (boilers, furnaces), mobile fleet, and fugitive refrigerant leaks
  • Scope 2: Location-based and market-based indirect emissions from purchased grid electricity and steam
  • Scope 3: Upstream & downstream category screening (Purchased goods, logistics, employee commute, waste generated)
  • +2 more
View programme

Global Reporting: GRI Standards, TCFD & CDP Disclosures

Positioning Indian enterprises on the global stage with top-tier ESG ratings and institutional investor disclosures.

Disclosure & Compliance/GRI Universal Standards 2021, TCFD, CDP & DJSI Frameworks

  • GRI Topic-Specific Standard mapping (GRI 300 Environmental, GRI 400 Social, GRI 200 Governance)
  • TCFD Climate Risk Assessment: Scenario analysis (1.5°C vs 4°C warming) across physical & transition risks
  • CDP Climate Change and Water Security questionnaire response preparation and score improvement
  • +1 more
View programme

Water Neutrality, Water Footprint & ZLD Feasibility

Corporate water stewardship, watershed risk analysis, effluent recycling, and Zero Liquid Discharge engineering.

Climate & Carbon/Alliance for Water Stewardship (AWS) & CPCB Effluent Guidelines

  • Quantitative water balance audit across manufacturing operations, cooling towers, and domestic utilities
  • Water source vulnerability and watershed basin risk mapping using WRI Aqueduct tools
  • Zero Liquid Discharge (ZLD) technical feasibility, RO reject recovery, and MEE optimization
  • +1 more
View programme

ISO 14001 (EMS) & ISO 50001 (EnMS) System Integration

End-to-end design, documentation, internal auditor training, and certification readiness for environmental and energy management.

Management Systems/ISO 14001:2015 & ISO 50001:2018 Standards

  • Initial Environmental Review (IER) and Energy Baseline (EnB) establishment
  • Identification of Environmental Aspects & Significant Impacts and Legal Register compilation
  • Significant Energy Users (SEUs) identification, energy performance indicators (EnPIs), and conservation measures
  • +2 more
View programme

Training Program

Certified workforce capability — drills, simulations and compliance training.

11 programmes

First Aid, CPR & Automated External Defibrillator (AED)

Hands-on life-saving medical emergency response and cardiopulmonary resuscitation with simulation mannequins.

Life Safety & Emergency/Factories Act 1948 Section 45, St. John Ambulance / Red Cross Guidelines

  • Assessment of scene safety, primary & secondary triage survey
  • Adult CPR techniques, chest compressions, and rescue breathing
  • Operation of Automated External Defibrillator (AED) in cardiac arrest
  • +4 more
View programme

Fire Safety, Fire Warden & Emergency Evacuation Drills

NBC 2016 Part 4 compliant industrial fire prevention, live fire extinguisher usage, and tactical evacuation leadership.

Life Safety & Emergency/National Building Code 2016 (Part 4), State Fire Prevention & Life Safety Acts

  • Chemistry of fire, fire triangle/tetrahedron, and classes of fire (Class A, B, C, D, K)
  • Fire detection systems (smoke, heat, flame detectors) and alarm response
  • Types of fire extinguishers (Water, Foam, CO2, ABC Dry Powder, Clean Agent)
  • +4 more
View programme

Industrial Disaster Preparedness & Business Continuity Planning (BCP)

Strategic mitigation, on-site emergency plans (OEP), and multi-hazard response for major accidents and natural disasters.

Life Safety & Emergency/Disaster Management Act 2005, MSIHC Rules 1989, Factories Act Section 41-B

  • Risk profiling: Industrial explosions, toxic chemical leaks, earthquakes, floods
  • Incident Command System (ICS) structure, roles, and communication hierarchy
  • Preparation and validation of On-Site Emergency Plans (OEP) & Off-Site coordination
  • +2 more
View programme

Electrical Safety & Lockout / Tagout (LOTO) Procedures

Zero electrical fatalities via CEA Regulations 2010, arc flash hazard mitigation, and rigorous hazardous energy isolation.

Industrial & Technical Safety/Central Electricity Authority (Measures relating to Safety & Electric Supply) Regulations 2010, NFPA 70E

  • Electrical shock hazards, arc flash boundaries, and arc blast energy dynamics
  • Safe working clearances for LT (415V) and HT (11kV / 33kV) switchgear
  • Earthing standards, earth pit resistance testing norms, and leakage circuit breakers
  • +3 more
View programme

Work at Height & Scaffold Safety

Comprehensive fall protection, full-body harness inspection, and scaffolding erection safety.

Industrial & Technical Safety/BOCW Act 1996, IS 3696 (Scaffolds and Ladders), OSHA 1926 Subpart M

  • Hierarchy of fall protection: Elimination, Prevention (Guardrails), Fall Arrest Systems
  • Full-body harness donning, 100% tie-off principle, and shock-absorbing twin lanyards
  • Anchor point selection, load testing (22.2 kN / 5,000 lbs rating), and lifeline setup
  • +2 more
View programme

Confined Space Entry, Gas Testing & Rescue Operations

Atmospheric testing, ventilation, permit compliance, and non-entry emergency rescue from tanks, silos, and manholes.

Industrial & Technical Safety/Factories Act 1948 Section 36, OSHA 29 CFR 1910.146

  • Definition and hazard identification in permit-required confined spaces (PRCS)
  • Atmospheric hazards: Oxygen deficiency (<19.5%) / enrichment (>23.5%), toxic gases (H2S, CO), flammable vapors (LEL limits)
  • Continuous gas testing protocols and multi-gas detector calibration
  • +3 more
View programme

Chemical Safety, HAZCHEM Handling & MSDS / GHS Management

Safe storage, spill containment, segregation matrix, and chemical emergency protocols for hazardous substances.

Industrial & Technical Safety/Manufacture, Storage and Import of Hazardous Chemical (MSIHC) Rules 1989, GHS Revision 8

  • Globally Harmonized System (GHS) pictograms, hazard statements, and 16-section SDS/MSDS
  • Chemical incompatibility matrix and secondary containment bunding rules
  • Toxicology basics: LD50, LC50, Permissible Exposure Limits (PEL/TLV)
  • +2 more
View programme

Material Handling & Forklift / Crane Safety

Mechanical handling, overhead crane rigging, forklift pre-shift inspection, and warehouse traffic management.

Industrial & Technical Safety/Factories Act 1948 Section 28 & 29 (Lifting Machinery and Gear), IS 13367

  • Forklift stability triangle, load center calculations, and speed governing
  • Daily pre-operational checklist: Brakes, hydraulics, horn, backup alarm, mast chain
  • Overhead crane operation: Wire rope inspection, hook latch verification, SWL limits
  • +2 more
View programme

Behavior-Based Safety (BBS) & Culture Transformation

Eliminating at-risk behaviors on Indian shopfloors through positive peer observation and safety leadership coaching.

Behavior & Governance/ISO 45001:2018 Leadership & Worker Participation Clause 5

  • Understanding the psychology of risk: Heinrich triangle and behavioral causes of incidents
  • ABC Model: Activators $\rightarrow$ Behaviors $\rightarrow$ Consequences
  • Conducting Safety Observation & Conversation (SOC) without blame culture
  • +2 more
View programme

POSH Act 2013 Compliance (Employees, Managers & ICC)

Statutory sexual harassment prevention training, gender sensitivity, and Internal Complaints Committee (ICC) case handling.

Behavior & Governance/Sexual Harassment of Women at Workplace (Prevention, Prohibition and Redressal) Act 2013

  • Definition of sexual harassment under Indian law (quid pro quo vs hostile work environment)
  • Rights of aggrieved women and statutory obligations of employers
  • Internal Committee (IC) composition, inquiry process, and report submission timelines (90 days)
  • +2 more
View programme

Corporate & Industrial Ergonomics & Postural Health

Combating musculoskeletal disorders (MSD), repetitive strain injuries (RSI), and desk fatigue in IT/ITES and factory floors.

Behavior & Governance/ISO 9241 Ergonomic Standards, OHSAS Guidelines

  • Biomechanics of spine, neck, and lumbar spine strain
  • Neutral posture principles for computer workstations (Monitor height, elbow 90-degree angle)
  • Industrial manual handling: RULA/REBA assessment techniques
  • +1 more
View programme

Not sure which programme your site actually needs?

A 30-minute diagnostic call with an auditor, not a salesperson. Bring your last inspection report and we will tell you where the exposure sits.

Book the diagnostic call