Industrial Safety
Lockout–tagout: six steps that hold up under inspection
LOTO failures are the most common root cause in serious electrical incidents. A procedure on paper is not the control — the isolation point discipline is.

Energy isolation looks procedural but is really an inventory problem. You cannot lock out what you have not identified, and most plants have never produced a complete energy isolation point register for a single line.
The six steps
Identify every energy source for the equipment, including stored energy: hydraulic pressure, compressed air, gravity on a raised load, thermal mass, and capacitance in drive systems.
Shut down through the normal stopping sequence rather than by pulling a disconnect under load.
Isolate at a device that physically separates the conductors, and verify that the device is lockable. A breaker with no lockout provision is not an isolation point.
Apply a personal lock and tag with the individual’s name, not a department or shift label. Group lockout requires a lock box with one key per worker.
Dissipate or restrain stored energy, then verify absence of voltage with a tested instrument on the conductor itself.
Where multiple shifts or contractors overlap, define the transfer-of-control ritual in writing — who removes their lock, when, and who confirms the line is clear.
Making it survive
The register is the deliverable. Each isolation point should carry an identifier physically matching the register, so a worker at the panel can confirm they are at the right device rather than the one described in the procedure.
Audit the audit: sample ten recent isolations per quarter and check that the verification step was actually performed, not just signed. That single sampling routine is what separates a LOTO programme from LOTO paperwork.
Industrial Safety
Talk to the author of this insight
Bring your site conditions and current compliance position. We will translate “Lockout–tagout: six steps that hold up under inspection” into a scoped audit, ESG or training plan for your operation.
- A senior engineer — not a salesperson — responds within one business day
- Indicative scope, timeline and fee with no obligation
- Confidential review; site data is never shared
Related notes
EHS & Compliance
Work at Height Safety: Rules, Fall Protection Controls and Permit Discipline for Indian Sites
Work at height safety for Indian sites: legal thresholds, fall protection choices, ladder and scaffold discipline, and permit controls that prevent falls.
11 min readESG & Sustainability
Water Stewardship for Industrial Sites in India: From Metering to Disclosure
Industrial water management in India: withdrawal and consumption accounting, zero liquid discharge choices, groundwater risk and the water data BRSR and investors now ask for.
9 min readEHS & Compliance
Warehouse Safety Audit: Risks, Checklist and Fixes for India's Fast-Growing Logistics Sector
A warehouse safety audit guide for Indian logistics: risk priorities, an IS 14489-aligned checklist, rack and forklift checks, and fixes that stick.
11 min read