All insights

Fire & Life Safety

Fire safety audit readiness under NBC 2016: the nine findings that repeat

A third-party fire audit is not a formality once the local fire officer asks for the report. These are the findings that show up in almost every industrial site.

Sustaira Advisory/27 Oct 2026/7 min read

National Building Code 2016 compliance is judged on the as-built condition of the site, not the approved drawing set. That distinction is the source of most audit findings: the drawings describe a compliant building, the building has drifted.

A structured walkthrough, with instruments rather than eyesight, reliably surfaces the same nine issues across manufacturing, warehousing and campus assets.

Passive and active protection

Fire compartments are breached by later cable trays and duct runs that were never sealed. A fire door propped open for airflow is a compartment failure even when the door itself is rated.

Hydrant and sprinkler systems test at acceptable pressure at the pump but under-perform at the most remote outlet. The audit needs a flow test at the hydraulically worst point, not at the riser.

Detection coverage has blind spots in false-ceiling voids and cable galleries — precisely where a slow-smouldering electrical fault starts.

Means of escape

Exit widths are reduced by stored material, or exits are locked from the inside for security. Both are common and both are treated as critical findings.

Travel distances exceed code limits after a layout change added a partition or a racking row.

Assembly points sit inside the theoretical radiant heat envelope of a tank farm or a process block, so the evacuation plan moves people toward the hazard rather than away from it.

Management systems

Evacuation drills are recorded as attendance rather than as measured evacuation times, so nobody knows whether the building empties inside its target window.

Fire wardens have changed roles and the current shift has no trained warden at all.

Extinguisher and hydrant inspection tags are filled in retrospectively — a documentation integrity issue that undermines every other record in the audit.

The remedy for all nine is unglamorous: a controlled drawing set, a change-approval gate for any penetration or layout change, and a drill programme that measures rather than attends.

Fire & Life Safety

Talk to the author of this insight

Bring your site conditions and current compliance position. We will translate “Fire safety audit readiness under NBC 2016: the nine findings that repeat” into a scoped audit, ESG or training plan for your operation.

  • A senior engineer — not a salesperson — responds within one business day
  • Indicative scope, timeline and fee with no obligation
  • Confidential review; site data is never shared

We reply within one business day. Your details stay with our practice team.